Tuotehaku
Tuoteluettelo
Tuote | |
---|---|
Suositellun tarvikkeen tuotenumero: 2910000301700
Suositellun tarvikkeen tuotenumero: A2C59517073
Suurin sallittu nopeus: 250 km/t
Vanteet: Peltivanteille
Vanteet: Alumiinivanteille
Venttiilivarsimateriaali: Alumiini
Väri: Hopea
Taajuusalue: 433 Mhz
Huomioi asennusohje:
Asennusohjeet
Check compatibility of rim with sensor.
|
|
Suositellun tarvikkeen tuotenumero: S180084520A
Suositellun tarvikkeen tuotenumero: A2C59517072
Suurin sallittu nopeus: 250 km/t
Vanteet: Peltivanteille
Vanteet: Alumiinivanteille
Venttiilivarsimateriaali: Alumiini
Väri: Hopea
Taajuusalue: 433 Mhz
Huomioi asennusohje:
Asennusohjeet
Check compatibility of rim with sensor.
|
|
HUOM!
Anturit ohjemoitavissa vain seuraavilla testereillä Ateq VT36 (open), VT46 (open), VT47, VT56, VT57 BH Sens DT41 Bartec TECH350/600 Bosch TPA300 Väri: Hopea
Taajuusalue: 433 Mhz
Materiaali: Teräs
|
|
HUOM!
Anturit ohjemoitavissa vain seuraavilla testereillä Ateq VT36 (open), VT46 (open), VT47, VT56, VT57 BH Sens DT41 Bartec TECH350/600 Bosch TPA300 Väri: Musta
Taajuusalue: 433 Mhz
Materiaali: Kumi
|
|
HUOM!
Anturit ohjemoitavissa vain seuraavilla testereillä Ateq VT36 (open), VT46 (open), VT47, VT56, VT57 BH Sens DT41 Bartec TECH350/600 Bosch TPA300 Väri: Musta
Taajuusalue: 433 Mhz
Materiaali: Teräs
|
|
HUOM!
Anturit ohjemoitavissa vain seuraavilla testereillä Ateq VT36 (open), VT46 (open), VT47, VT56, VT57 BH Sens DT41 Bartec TECH350/600 Bosch TPA300 Väri: Titaani
Taajuusalue: 433 Mhz
Materiaali: Teräs
|
|
Venttiilivarsimateriaali: Alumiini
Väri: Hopea
Tuotenro: A2C59511309
Huomioi asennusohje:
Asennusohjeet
Tightening torque for the union nut: 6 Nm
Tightening torque for the valve insert: 0.4 Nm
|
|
Venttiilivarsimateriaali: Alumiini
Väri: Hopea
Tuotenro: S180052064Z
Tuotenro: S180084700Z
Huomioi asennusohje:
Yleiset tiedot
TPMS sensor must be taught in
Only for sensor TG1C (see documentation)
Asennusohjeet
Tightening torque for the union nut: 8 Nm
Tightening torque for the valve insert: 0.4 Nm
|
|
Venttiilivarsimateriaali: Alumiini
Väri: Hopea
Tuotenro: S180084720Z
Huomioi asennusohje:
Yleiset tiedot
Only for sensor TG1C (see documentation)
Asennusohjeet
Tightening torque for the union nut: 8 Nm
Tightening torque for the valve insert: 0.4 Nm
|
|
Rengaspaineanturi peltivanteelle.
Huom. varmistathan sopivuuden OE numerolla. Ohjelmoitava Herth+Buss:in testerillä Vaihtoehdot HB-95990001 ja HB-95990021. saakka: 9 bar
Venttiilin väri: Musta
Lisätieto: Venttiileillä
Materiaali: Kumi-metalli
Taajuusalue: 433 Mhz
Suositellun erikoistyökalun tuotenumero: 95990021
vain jos: 95990021
Tekniset tiedot
Herth+Buss wheel sensors can be used in all vehicles
that have a tyre pressure monitoring system installed as standard.The programming device AirGuard 95990001/- 021 is required for the programming and adjustment of the sensors of each vehicle. This process only takes between 5 and 15 seconds per sensor. An outstanding feature of the Herth+Buss wheel sensors: the original serial/ID number can be copied from the "old" sensor to the new one, or can be reassigned. In addition, the wheel sensors can be rewritten, and can be used in aluminium and steel rims. The sensors can be ordered individually and are supplied with a complete valve. A replacement valve is also available. . one for all: optimum stockage with just one universal wheel sensor . for steel or aluminium rims . certification up to 210 km/h . battery service life: 3-7 years . only programmable in connec |